iER220-3100-DW - ESTUN Automation-ESTUN AUTOMATION

Front page >Product Center >Industrial Robot >General‑Purpose Robot >High Payload Series

High Payload Series

iER220-3100-DW

CE

Maximum Reach

3100mm
Maximum Payload

220kg
Axis Count

6-Axis
Body Weight

1470kg

robot
Joint Parameters
Control Cabinet
Teach Pendant (Optional)

Parameter	Value
Model	iER220-3100-DW
Number of Axes	6-Axis
Maximum Load	220 kg
Maximum Reach	3100 mm
Repeat Positioning Accuracy	±0.06 mm
Body Weight	1470 kg
Protection Rating	Wrist IP65, Main Body IP54
Mounting Type	Ceiling Mount
Drive Method	AC Servo Motor Drive
Installation Conditions	Temperature: 0 to 45°C; Humidity: 20 to 80% RH; Allowable Altitude: Below 1000 m; Vibration Acceleration: 4.9 m/s² (0.5G) or less; No Corrosive Gases
Supported Certification	CE
Remarks	For details, please refer to the manual or consult our company

Joint	Motion Range	Maximum Speed	Allowable Load Moment of Inertia / Torque
J1	-180° ~ +180°	118°/s	-
J2	-40° ~ +170°	112°/s	-
J3	-180° ~ +80°	95°/s	-
J4	-360° ~ +360°	177°/s	150 kg·m²/1380 N·m
J5	-125° ~ +125°	169°/s	150 kg·m²/1380 N·m
J6	-360° ~ +360°	227°/s	85 kg·m²/740 N·m

Installation Parameters	Value
Dimensions	800550960 (mm, LWH)
Control Cabinet Weight	135 kg
Rated Power	8 kW
Reference Energy Consumption	3.45 kW·h
Installation Environment	Ventilated, Non-Sealed
Minimum Installation Space	120018001400 (mm, LWH)
Operating Environment	Temperature: 0°C~45°C; Humidity: 20%~80% RH
Communication Method	Standard: EtherCAT, Modbus TCP, TCP/IP, EtherNet IP; Optional (requires additional module purchase): EC slave to PN master (HS), EC slave to EC master (SD), EC slave to PN slave (ET), EC slave to CC-LINK slave (HS), Modbus to DeviceNET slave (HS), EC slave to Profibus slave (HS)
Interconnect Cable Length (Subject to actual confirmation by the manufacturer's business team)	Standard: 8 m; Optional: 15 m, 20 m, 10 m (flexible), 15 m (flexible), 20 m (flexible), 25 m (flexible), 30 m (flexible)
Cable Reservation Space to Robot Base	Non-Flexible Cable: ≥800 mm; Flexible Cable: ≥300 mm
Power Cable Bending Radius	Non-Flexible: ≥690 mm; Flexible: ≥200 mm
Encoder Cable Bending Radius	Non-Flexible: ≥400 mm; Flexible: ≥200 mm
I/O Cable Bending Radius	Non-Flexible: ≥260 mm; Flexible: ≥130 mm
Heavy-Duty Connector Size to Robot Base

Specification Parameter	Value
Control Cabinet Main Power Supply	Three-Phase AC 380V - 440V, 50/60Hz
Number of Controlled Axes	4~6
Storage Environment	Temperature: -20°C~60°C; Humidity: 95%RH or below (Non-Condensing, Non-Freezing)
Insulation Resistance	100 MΩ or above
Vibration Resistance	4.9 m/s²
Shock Resistance	19.6 m/s²
Altitude	Below 1000 m
EMC Test Standard	IEC 61000-6-2
Protection Rating	IP54

Interface Name	Value
Teach Pendant Interface	Connection interface between the teach pendant and the control cabinet, used to connect the teach pendant and the control cabinet.
Main Power Cable Interface	Power inlet of the control cabinet. The power cable needs to pass through this interface into the control cabinet for wiring.
Grounding Stud	Used for grounding, connected to the body base.
I/O Cable Interface	The I/O cable inside the control cabinet passes out from here.
6-Axis Encoder Cable Interface	The robot's encoder cable passes out of the control cabinet from here. The encoder cable inside the control cabinet is already connected; only connection on the robot side is required.
I/O Cable Reserved Interface	Reserved I/O cable interface, can be used for additional I/O cables or SAFETY I/O cables to pass through.
Remote Operation Elf Antenna Reserved Interface	Reserved interface for the remote operation elf antenna, used for routing the optional remote operation elf antenna out of the cabinet.
Reserved Interface	Reserved cable outlet position, currently sealed with a metal plate. Users can modify the metal plate according to their needs to route cables out, but the IP rating must be guaranteed.
RJ45 Interface	Reserved RJ45 interface, used for connection between the external communication network and the control cabinet. The inside of the control cabinet has already been connected to the controller.

Parameter	Value
LCD Screen	TFT 7 Inch 800*480
External USB	2.0*1
Indicator Light	3 pcs
Communication	Ethernet: 1-channel 10/100 Mbps auto-adaptive
Accessories	Emergency stop; Key switch (two-position); Enable switch (three-position)
Operating Environment	Operating Temperature: -10°C~50°C
Storage Temperature	-20°C~60°C
Teach Pendant Cable Length (Subject to actual confirmation by the manufacturer's business team)	Standard: 8 m; Optional: 15 m, 20 m, 25 m, 30 m
Protection Rating	IP54
Weight	1090±10g (excluding cable)

	FileName	Category	Format	Release Date	Operation
No documents found.