Robot Peripherals and Accessories

Arc Welding Power Source

CLOOS Welding Power Sources — NexT Series

Engineered for exceptional performance, QINEO NexT welding systems are designed for professionals seeking outstanding weld quality and demanding automated applications. A wide range of welding processes supports carbon steel, stainless steel, aluminum, titanium and nickel alloys, delivering high-quality results from ultra-thin sheet to heavy plate.

Manual Version

Automated Version

Product Features

NexT 602 — Twin-Wire, Dual-Power Welding Since 1996

The Tandem twin-wire process coordinates both arcs without mutual interference, delivering high deposition rates, deep penetration, fast welding and low heat input. Pulse synchronization supports coordinated operation of multiple twin-wire systems.

Typical Applications

Commercial vehicles

Shipbuilding and offshore engineering

Boilers

Oil and gas pipelines

Rail transport

Defense industry

NexT 452 — MoTion Power Source with 180 Hz Wire Feed and Retraction

Equipped with both pulsed and DC dynamic welding processes.

Typical Applications

Automotive manufacturing (0.5 mm sheet)

Environmental equipment

New energy applications (aluminum battery trays)

Additive manufacturing

Electrical equipment

Supports advanced automated welding modules

Expandable with automated/manual push-pull torches, AC/DC modules and more

Special process software packages for demanding materials, including nickel and titanium alloys

Premium Control Panel — Advanced, Intelligent Operation

Intuitive operation

Diagnostic functions

Stores four welding-circuit inductance settings

MasterPlus Control Panel — Optimized for Manual Welding

Intuitive operation

Job favorites

Stores four welding-circuit inductance settings

Technical Specifications

QINEO StarT	QINEO NexT 452	QINEO NexT 452 AC	QINEO NexT 602	QINEO NexT 612
Welding current	25A/15V-450A/36.5V	25A/15V-450A/36.5V	25A/15V-600A/44V	15V-600A
Welding current at 60% duty cycle*	450A/36.5V	450A/36.5V	600A/44V	Not specified
Welding current at 100% duty cycle*	350A/31.5V	350A/31.5V	500A/39V	600A/44V
Open-circuit voltage	80V	75V	80V	76V-96V
Mains voltage	380–480 V / three-phase	380–480 V / three-phase	380–480 V / three-phase	380–480 V / three-phase
Connection cable	4 x 6 mm2	4 x 6 mm2	4 x 10 mm2	4 x 10 mm2
Mains fuse	32A	32A	50A	63A
Protection rating	IP23	IP23	IP23	IP23
Insulation class	F	F	F	F
Cooling method	F	F	F	F
Dimensions (L × W × H)	720 x 340 x 500 mm	720 x 340 x 782 mm	720 x 340 x 500 mm	700 x 340 x 255 mm
Power unit weight	63kg	92kg	65kg	63kg
Cooling module weight	28kg	28kg	28kg	28kg

*At an ambient temperature of 40°C.

Wire Feeder

QWD-P5

WDA-50

Wire Feeder	QWD-P5	WDA-50
Wire feed speed	Max.24m/min	Max.20m/min
Dimensions (L × W × H)	620/385/255 mm	380/180/260 mm
Weight	21.1kg	10.2kg
Wire diameter	0.8-2.0 mm	0.6-2.4 mm

QINEO NexT Series — Selection Guide

Category	ModelConfiguration	NexT452(Premium)	NexT452(Master)	NexT452AC(Premium)	NexT602(Premium)	NexT602(Master)	NexT612(Premium)
Category	ModelConfiguration	Automated welding	Manual welding	Automated welding	Automated welding	Manual welding	Automated welding
Materials	Carbon steel
	Stainless steel
	Aluminum alloy
	Titanium alloy
Processes	MMA
	TIG
	CAC-A
	Control Weld
	Speed Weld
	Vari Weld
	Rapid Weld
	Root Weld
	Cold Weld
	Motion
	MIX
	Fine Weld
Configuration	Control panel	Premium	MasterPlus	Premium	Premium	MasterPlus	Premium
	Wire Feeder	WDA-50	P5	WDA-50	WDA-50	P5	WDA-50
	Cooling unit	Premium/MasterPlus
	Interconnection cable	5 m / 10 m / custom
	Euro torch connector
	Trolley / base
	Communication module	D/E/P		D/E/P	D/E/P		D/E/P

● Standard ○ Optional — Not supported Note ①: DeviceNet / EtherNet/IP / PROFINET

Download Materials

Category File name

	File Name	Category	Format	Release Date	Operation
No documents found.