CNC system for press machine
PAC10- Electronic Cam Controller for Mechanical Press
PAC10 is an electronic cam controller specifically designed for mechanical presses. Easy to install and use, replacing mechanical camshafts and various counters. Implement clutch control to accurately stop the slider at dead center; The cam channel has a fast output response, meeting the requirements for producing high-quality products on machine tools; Can monitor the clutch and improve the safety of the machine tool; Setting the cam on the panel is safe and convenient.
Product Advantages
Stroke count/angle display
Production count display and setting
12 sets of outputs
Multiple group cutting (cutting)
Bottom dead center setting
Second angle setting
Vertex positioning correction, accurate top dead center
Automatic calculation of brake angle
Forward/Reverse parameter setting
Machine tool high/low speed protection
Detection of braking inertia
Clutch brake counting
Various alarm prompts
Input/output port monitoring
Self correction of crankshaft position
Stroke count/angle display: When the speed is greater than 10SPM, the stroke count is displayed; When the speed is ≤ 10SPM, the angle value is displayed.
12 sets of outputs: Among them, 10 sets of electronic camshafts and 2 sets of clutch PAC10 are dedicated electronic cam controllers for mechanical presses. Easy to install and use, replacing mechanical camshafts and various counters. Implement clutch control to accurately stop the slider at dead center; Cam channel. Fast output response, meeting the requirements of producing high-quality products for machine tools; Can monitor the clutch and improve the safety of the machine tool; Setting the cam on the panel is safe and convenient.
Product Example
Legend
Download Materials
| FileName | Category | Format | Release Date | Operation | |
|---|---|---|---|---|---|
| No documents found. | |||||
