iER15-1430-MI - ESTUN Automation-ESTUN AUTOMATION

Front page >Product Center >Industrial Robot >General‑Purpose Robot >MINI Series

MINI Series

iER15-1430-MI

Maximum Reach

1430mm
Maximum Payload

15kg
Axis Count

6-Axis
Body Weight

155kg

robot
Joint Parameters
Control Cabinet
Teach Pendant (Optional)

Parameter	Value
Model	iER15-1430-MI
Number of Axes	6
Maximum Load	15 kg
Maximum Reach	1430 mm
Repeat Positioning Accuracy	±0.03 mm
Body Weight	155 kg
Protection Rating	IP67
Mounting Type	Floor/Ceiling
Drive Method	AC Servo Motor Drive
Installation Conditions	Temperature: 0 to 45°C; Humidity: 20 to 80% RH; Allowable Altitude: Below 1000 m; Vibration Acceleration: 4.9 m/s² (0.5G) or less; No Corrosive Gases; Keep away from electrical noise sources.
Supported Certification	CE

*For details, please refer to the manual or consult our company.

Joint	Motion Range	Maximum Speed	Allowable Load Moment of Inertia / Torque
J1	-170° ~ +170°	270°/s	-
J2	-140° ~ +140°	250°/s	-
J3	-250° ~ +70°	380°/s	-
J4	-210° ~ +210°	520°/s	1.45 kg·m²/34.2 N·m
J5	-130° ~ +130°	450°/s	1.45 kg·m²/34.2 N·m
J6	-360° ~ +360°	700°/s	0.94 kg·m²/14.5 N·m

Installation Parameters	Value
Dimensions	440330102 (mm, LWH)
Control Cabinet Weight	10 kg
Rated Power	1.5 kW
Reference Energy Consumption	0.81 kW·h
Installation Environment	Ventilated, Non-Sealed
Minimum Installation Space	520410182 (mm, LWH)
Operating Environment	Temperature: 0°C~45°C
Communication Method	Standard: EtherCAT, Modbus TCP, TCP/IP; Optional (requires additional module purchase): Profinet, Profibus, CCLINK, EtherNet IP
Interconnect Cable Length (Subject to actual confirmation by the manufacturer's business team)	Standard: 3 m; Optional: 5 m, 5 m (flexible), 10 m, 10 m (flexible), 15 m, 15 m (flexible), 20 m, 20 m (flexible)
Cable Reservation Space to Robot Base	Non-Flexible: ≥450 mm; Flexible: ≥300 mm
Power Cable Bending Radius	Non-Flexible: ≥350 mm; Flexible: ≥200 mm
Encoder Cable Bending Radius	Non-Flexible: ≥350 mm; Flexible: ≥200 mm
I/O Cable Bending Radius	Non-Flexible: ≥350 mm; Flexible: ≥200 mm
Heavy-Duty Connector Size to Robot Base	735772 (mm, LWH)

Specification Parameter	Value
Control Cabinet Main Power Supply	Single-Phase AC 220V~240V, 50/60Hz
Number of Controlled Axes	3 ~ 6
Storage Environment	Temperature: -20°C ~ 60°C; Humidity: 95%RH or below (Non-Condensing, Non-Freezing)
Insulation Resistance	100 MΩ or above
Vibration Resistance	10Hz ≤ f ≤ 57Hz, amplitude 0.15mm
Shock Resistance	Maximum not exceeding 15g, duration 11ms
Altitude	Below 1000 m
EMC Test Standard	IEC 61000-6-2:2019, IEC 61000-6-4:2019
Protection Rating	IP20

Interface Parameter	Value
Power Cable Interface	Motor power cable interface for each robot axis; one interface corresponds to 2 axes (3 interfaces for 6 axes; 2 interfaces for 4 axes)
Heat Dissipation Air Inlet	Control cabinet heat dissipation air inlet; a filter cotton can be installed inside (optional)
Mode Selection Switch	Robot control mode key switch: turn left for automatic mode, turn right for manual mode
Teach Pendant Interface	Cable interface for the robot teach pendant
LED Indicator Light	System status indication (refer to the indicator light instructions for details)
Expansion Slots 1, 2, 3	Users can select different types of expansion cards according to their needs
Power Switch	Power switch for the robot control cabinet, used to turn the control cabinet power on/off
Encoder Interface	Motor encoder cable interface for each robot axis, used to collect robot position signals; use dedicated cables to connect to the robot body
Ethernet1 Interface	Mainly used for teach pendant, EScope, MultiProg monitoring, etc.
EtherCAT Interface	EtherCAT primary master, mainly used for robot additional axis expansion
Ethernet2 Interface	Network port reserved for the manufacturer
Ethernet3 Interface	Mainly used for external communication based on Ethernet, supporting jumbo frames (9~10K)
USB Interface	Used for controller data transmission or connecting external devices
Standard I/O Interface	Standard user DI/DO for the control cabinet, used for signal connection between external devices and the control cabinet; among them, the system I/O is 6DI, 7DO, and the user I/O is 14DI and 13DO
Safety I/O Interface	Used for connecting safety signals such as external emergency stop and safety doors

Parameter	Value
LCD Screen	TFT 7 Inch 800*480
External USB	2.0*1
Indicator Light	3 pcs
Communication	Ethernet: 1-channel 10/100 Mbps auto-adaptive
Accessories	Emergency stop; Key switch; Enable switch (three-position)
Operating Environment	Operating Temperature: -10°C ~ 50°C
Storage Temperature	-20°C ~ 60°C
Teach Pendant Cable Length (Subject to actual confirmation by the manufacturer's business team)	Standard: 7 m; Optional: 15 m, 20 m, 25 m, 30 m
Protection Rating	IP54
Weight	1090±10g (excluding cable)

	FileName	Category	Format	Release Date	Operation
No documents found.